Sourcing smarter. Delivering better.

Since 2005

Networking infrastructure, connectivity and hard-to-find infrastructure components - sourced, built and delivered by one experienced team.

Request a quote Talk to the team

02 / Manufacturing

Custom design & build

Built around a drawing or an application.

Bespoke copper, power (IEC), fibre and general infrastructure assemblies - from a single prototype to a full production run, our team can help.

A Cat6A S/FTP shielded patch lead, RJ45 to RJ45, in a cobalt blue LSZH jacket with snagless boots and labelled at both ends

01 / CopperCat6A S/FTP RJ45 patch lead · 3 m

Cable: Cat6A S/FTP · 4 pr 26AWG stranded · LSZH
Wiring: T568B / T568B · shield to both shells
Category: Cat6A / Class E_A · 500 MHz
Shield: continuity to both connector shells
QA: 100% wiremap + shield continuity

Copper QA

WiremapT568B / T568B ✓Pass

ContinuityPins 1–8 ✓Pass

ShieldShell A ↔ B ✓Pass

Shorts / opensNone ✓Pass

Title: Custom copper assembly
Part no.: On approval
Dwg: CA-021
Rev: A
Scale: NTS
Units: mm
Status: Approved for build

Test record traceable by serial no.

Final inspection · Pass

An OM3 duplex fibre patch lead, LC/UPC to LC/UPC, in an aqua LSZH jacket and labelled at both ends

02 / FibreOM3 duplex LC/UPC patch lead · 3 m

Cable: OM3 50/125 µm · 2.0 mm duplex zipcord · LSZH
Polarity: A–B · verify before release
Label: End A / End B · serial / job reference
QA: 100% optical test + end-face inspection
Fit dust caps after final inspection

Optical QA

Fibre 01A1 → B2 ✓IL 0.18 dBPass

Fibre 02A2 → B1 ✓IL 0.17 dBPass

PolarityA–BPass

End-faceInspectedPass

Title: Custom fibre assembly
Part no.: RCL-FA-00014
Dwg: FA-014
Rev: A
Scale: NTS
Units: mm
Status: Approved for build

Test record traceable by serial no.

Final inspection · Pass

An IEC C13 to C14 power lead with red moulded connectors matching its red flexible cable, labelled at both ends

03 / PowerIEC C13–C14 power lead · red · 3 m

Cable: H05VV-F 3G1.0 mm² · red · example construction
Rating: 10 A / 250 V AC nominal · confirm to spec
Conductors: L / N / PE · straight-through
QA: 100% continuity, polarity + safety test
Label: End A / End B · serial / job reference

Electrical QA

EarthPE A ↔ B ✓Pass

Line / neutralL, N ✓Pass

PolarityL / N ✓Pass

SafetyInsulation ✓Pass

Title: Custom power assembly
Part no.: On approval
Dwg: PA-008
Rev: A
Scale: NTS
Units: mm
Status: Approved for build

Test record traceable by serial no.

Final inspection · Pass

01Drawing
02Build
03Test
04Label
05Dispatch

Talk to the workshop Send us a part number 01793 644899

Your drawing, sample or requirement - engineered into a controlled assembly drawing for approval. Terminated and assembled to the controlled drawing. Every lead tested: wiremap and shield continuity, optical inspection and polarity, earth continuity and electrical safety. Ends labelled to your scheme, with serial and job reference for traceability. Final inspection complete. Protected, packed and ready to install.

03 / Sourcing

Give us the part number.
Or just the challenge.

The exact part, a like-for-like equivalent, or one custom made for the job - sourced by people who know what they are looking for, and are never tied to one source!

You send

01Part numberOEM or supplier reference
02DrawingPDF, CAD or specification
03PhotographThe part, label or installation
04RequirementTell us what it needs to do

You get

01OriginalThe exact manufacturer part
02EquivalentA specification-matched alternative
03Specialist sourceFound through our wider supply network
04Custom buildMade to your drawing or sample

One enquiry. Global possibilities.

Send us a part number [email protected] 01793 644899